Few examples of the immensely large range of producible profiles. This profiles shapes have been achieved on the BIMA 6-2 machine, with the help of the POS 2000 control from Schröder Maschinenbau

BIMA 6-1.25
Bending length  6 m
Sheet thickness 1.25 mm

Optionals:
 - with hydraulic shearing
 - with standard control unit
 - without depth stop

BIMA 3-3
Bending length 3 m
Sheet thickness 3 mm

Optionals:
 - with hydraulic shearing
 - with standard control unit
 - with depth stop

BIMA 8-3
Bending length  8 m
Sheet thickness  3 mm

Optionals:
 - with hydraulic shearing
 - with standard control unit
 - with depth stop

BIMA 3-3

Side  view of a machine with hydraulic shearing,depth stop and clamping bar for manual radius adjustment.

BIMA 3-3

Side view of a machine with depth stop.

BIMA shears

BIMA 6-1.25

Detail of an hydraulic shear suitable for a thickness up to 1.5 mm.

Segment inserts for special requirements.
Available lengths:
50 - 100 - 150 - 200 - 300 - 400 - 500 - 600 - 1000 mm